meshing

英 [ˈmeʃɪŋ]

美 [ˈmeʃɪŋ]

v.  (使)吻合，相配，匹配，适合; 啮合
mesh的现在分词

COCA.41043

柯林斯词典

• N-VAR 网眼织物;网状物
  Meshis material like a net made from wire, thread, or plastic.
  1. The ground-floor windows are obscured by wire mesh.
     一楼的窗户装有防盗网。
  2. ...a mesh small enough to exclude tiny insects.
     网眼小得足以挡住小昆虫的网
• V-RECIP-ERG (使)相匹配;(使)相互协调;(使)吻合
  If two things or ideasmeshorare meshed, they go together well or fit together closely.
  1. Their senses of humor meshed perfectly...
     他们的幽默感配合得天衣无缝。
  2. This of course meshes with the economic philosophy of those on the right...
     这自然与右派的经济哲学相吻合。
  3. Meshing the research and marketing operations will be Mr. Furlaud's job.
     把研究与市场运作紧密结合起来将成为弗劳德先生的工作任务。

英英释义

noun

• the act of interlocking or meshing
  1. an interlocking of arms by the police held the crowd in check
  Synonym:meshinterlockinterlocking
• an open fabric of string or rope or wire woven together at regular intervals
  Synonym:netnetworkmeshmeshwork
• contact by fitting together
  1. the engagement of the clutch
  2. the meshing of gears
  Synonym:engagementmeshinterlocking

双语例句

• Study on the Meshing Principle of Three-freedom Straight and Inclined Gear;
  三自由度直、斜齿齿轮啮合机理的研究一齿轮与另一齿轮啮合。
• And it counted the different phase equivalent gap in gear meshing, and draw corresponding graph, then got the equivalent gap change character in arc tooth cylindrical gears meshing.
  计算了齿轮工作啮合中不同相位的当量间隙，绘制了相应的曲线图，得出了弧齿圆柱齿轮啮合中当量间隙的变化特性。
• The character of special master gear wear for gear meshing and seperating technique is studied in this paper.
  本文研究了齿轮啮合分离测试技术中测量齿轮的磨损特性，通过对测量时磨损规律的分析。
• The difference between the plunge shaving and the conventional shaving is pointed out from the meshing points of view.
  分析并阐述了径向剃齿法与普通剃齿法在啮合原理上的区别；
• To improve tooth strength and make tooth grinding implement for face gear, a new generating method of face gear drive has been proposed, and the meshing characteristics are investigated.
  为了提高面齿轮副的强度并解决其磨齿问题，提出了弧线齿面齿轮副的一种新的加工方法，并研究其啮合特性。
• The structure and principle of reciprocating positioning chain are introduced, and the meshing process is analyzed also.
  摘要介绍循环定位链传动的结构及工作原理，并分析啮合过程。
• And then, meshing and setting boundary conditions are finished according to simulation need.
  然后根据模拟仿真的要求，划分网格和设置边界条件。
• Between two or more sprocket with the chain as a flexible draw-off element meshing transmission.
  两个或多于两个链轮之间用链作为挠性拉曳元件的一种啮合传动。
• The Optimization Design of Meshing Parameters for a Involute Harmonic Gear
  渐开线谐波齿轮啮合参数的优化设计
• It evaluated the maximum and minimum errors of tooth end shape meshing phases.
  评定了齿端廓形啮合相位的最大、最小误差。